/information.php

Quality External and Internal Doors at Great Prices

£0.00
0 Items

Call 01332 770588
or email sales@vibrantdoors.co.uk

External Bifold Doors

External French Doors

External
Doors

Internal
Bifold Doors

Internal
French Doors

Internal
Doors

Fire
Doors

Door
Sets

Accessories & Hardware

Sliding
Doors

Pocket
Doors

Special
Offers

Free, Fast Delivery Over £750

10 Year Guarantee

Price Match Promise

4500+ Doors Sold Every Week

Expert Advice

What Is the Difference Between a Door Jamb and a Door Frame?

If you've ever heard the terms door jamb and door frame used interchangeably, you might be surprised to learn they are not the same thing.

In simple terms, the door jamb is just one part of the door frame, whereas the door frame is the entire structure around the door. Understanding the differences between a door jamb and a door frame is important when installing or repairing doors, because each plays its own role in how your door functions.

In this guide, we'll break down what a door jamb is, what a door frame is, how they differ and answer some common questions about these essential parts of a doorway. By the end, you’ll know exactly what each term means and why both the door and frame need to be just right to get the best out of your doors.

What is a door jamb?

A door jamb is the vertical part of the door’s frame on either side of the opening. In other words, the jambs are the “legs” of the frame that run up and down alongside the door.

Typically, there would be two door jambs in a door frame - one on the hinge side and one on the latch side. The hinge-side jamb is where the door’s hinges are mounted and the other jamb (often called the strike jamb or latch-side jamb) is where the strike plate and recess for the lock bolt would be. When you open or close a door, it’s pivoting on hinges attached to the door jamb and when you latch or lock it, the bolt extends into the opposite jamb.

Why is it called a jamb?

The meaning of “door jamb” literally comes from the French word jambe, which means “leg” - a fitting name, since the jambs support the door like legs. A door jamb is sometimes also called a doorpost by the older folks amongst us. But no matter the name, the jamb’s job is largely structural. It will bear the weight of the door via the hinges and keeps the door in alignment within the frame.

Why is a door jamb important?

Because of this load-bearing role, a door that doesn’t close or latch properly often indicates an issue with the jamb being out of plumb (not perfectly vertical) or damaged. In fact, the accuracy and strength of the jamb installation is vitally important for the door to operate smoothly and securely over time. If a jamb isn’t plumb, the door may rub against the frame or the latch may not align with the strike plate, leading to a door that sticks or won’t lock properly that could ultimately lead to irreparable damage.

Most door jambs also have a stop (a thin strip of wood) either attached to them or milled as part of the jamb, which the door closes against. This prevents the door from swinging through the frame. In many modern pre-hung door sets, the stop is a separate piece nailed to the jamb. In some frames (especially interior ones), the jamb may be rebated, meaning it has a notch that acts as a built-in stop. Additionally, door jambs might include cutouts or recesses for hardware like hinge plates and the strike plate for the latch.

What is a door frame?

A door frame is the entire framework of a doorway into which the door is fitted. It includes all the parts that surround and support the door, not just the jambs.

What parts make up a door frame?

In a standard door frame, you will find:

Two side jambs: the vertical pieces on the left and right side (the parts we discussed above). These are sometimes called the legs of the frame.
Head jamb (Header): the horizontal piece at the very top of the frame that spans the width of the door opening. This top piece connects the two side jambs and completes the rectangular frame.
Sill (Threshold): the horizontal piece at the bottom of the frame, which you step over when going through the door. The sill is more common on exterior door frames (to provide support and keep out water or drafts) and is usually absent on internal door frames. In interior doorways, the floor itself often serves as the “bottom” of the opening, so an interior door frame typically doesn’t have a sill/threshold piece.
Door stops: these are thin strips running along the jambs (and sometimes across the head) on the inside of the frame, which the door closes against. Stops can be separate pieces nailed on, or integrated (rebated) into the jambs as noted earlier. They “stop” the door from swinging past the frame.

Is a door jamb the same as a door casing or trim?

No. The door jamb is a structural part of the door frame, whereas casing is a decorative covering around the frame.

Once the frame and jambs are installed, you would usually add trim on the wall around the frame, such as an architrave or casing, to tidy up the gap between the frame and the wall. This trim, however, is not structurally part of the frame - it’s decorative and can be as flamboyant or as subtle as you like. More on door trim casing in a moment.

So essentially, the door frame is the framework that surrounds the door and holds it in place in the wall opening. A pre-hung door comes with the door already mounted on hinges in a complete frame, ready to fit into the doorway.

The frame fits into a rough opening in the wall (often secured to wall studs or masonry), and it must be installed square and plumb so that the door hung inside it will open and close properly. It’s important when ordering a new door that the thickness of the frame is also taken into account, otherwise you may end up with a door that’s too big for the opening.

Door Jamb vs. Door Frame: What's the Difference?

Now that we’ve defined both components, let’s summarise the difference between a door jamb and a door frame.

The door jamb vs door frame comparison can be understood as part vs whole...

Scope

A door frame is the whole assembly that surrounds the door - including both side jambs, the head jamb, and (for exterior doors) the sill. A door jamb, on the other hand, is just one part of that frame - specifically, one of the vertical side pieces. In other words, the jamb is a component of the frame, not the entire frame.

Function

The door frame’s job is to hold the door in place within the wall, provide structural support and make sure the door is properly aligned in the opening. The frame as a whole bears the load of the door and connects to the surrounding wall (often anchored with screws or nails through the jambs into the wall framing).

On the other hand, the door jambs specifically have the role of mounting the door hardware - the hinges attach to one jamb, and the latch and strike plate to the other. You can think of the frame as supporting the entire system, while the jambs support the movement of the door.

Interdependence

Because the jambs are part of the frame, you can’t really have a functional door frame without jambs. If a jamb is improperly installed, the frame’s effectiveness is compromised. For example, if the jamb warps or comes loose, the door may not close properly even if the rest of the frame (head and sill) is solid.

Can I replace a door jamb without replacing the entire door frame?

Yes, it’s often possible to replace or repair just a door jamb if it’s damaged, without having to replace the whole frame and door, BUT it depends on the situation. In many cases of door repair, you might just replace or adjust a single jamb (for instance, if the hinge-side jamb is damaged, it can sometimes be repaired without replacing the entire frame).

However, the frame and jambs work together, the frame gives the door a structure to hang in and the jambs give specific mounting points for the door and lock, so it’s imperative that the new jamb is like for like if you’re not replacing the whole frame.

Installation

Installing a door frame typically means assembling all its components separately (jambs, head, sill) and securing them as a unit in the rough opening of a wall. When you install a pre-hung door, the frame (with jambs) is already assembled, making the job a lot easier.

Terminology Confusion

It’s common for many homeowners (especially non-DIYer's) to refer to the whole door frame as “the jamb” or not differentiate them. But technically, saying “replace the jamb” means just the vertical piece, whereas “replace the frame” implies the whole thing (jambs + head and maybe the threshold).

Knowing the difference helps when you’re buying materials or talking to a professional. For example, if a DIY guide says "secure the jamb in the opening," they’re referring to the side pieces, not the entire frame. And if someone talks about a “jamb kit” or “lining set,” they usually mean the side and top pieces (frame minus the door itself).

In short, the door jamb is part of the door frame. All door jambs are in a door frame, but not all parts of a door frame are jambs. The frame is the total supporting structure, and the jambs are the vertical supports within that structure.

When comparing door jamb vs door frame, it’s like comparing a wheel to a car - the wheel is part of the car, but the car has many other parts too.

Internal vs External Door Jambs and Frames

You might also wonder if there’s any difference between internal door jambs (for interior doors) and those used in exterior doors. The basic components and definitions we covered remain the same, but there are a few key differences in design and materials due to the different needs of interior vs exterior doors.

As mentioned before, internal door frames (interior door jambs and head) usually do not include a sill or threshold at the bottom. Interior doors typically have a continuous floor surface running through the doorway, so the frame consists only of the two upright jambs and the top piece (head).

In the UK, an internal frame (jambs and head) is often sold as a door lining kit. These internal jambs are commonly made of softwood or engineered wood (like pine or MDF) and are often smaller in profile compared to exterior jambs, since they don’t need to accommodate heavy weatherstripping or insulation.

They primarily serve to hold bedroom, bathroom and other internal doors, where the demands are lighter.

External door frames on the other hand, typically include a sill/threshold piece at the bottom to complete the frame and provide a step-over that helps seal the exterior door against wind, rain and drafts. External door jambs and frames also tend to be made of heartier materials - often hardwood, composite, PVC or metal - or they may have rot-resistant features because they are exposed to weather.

For example, an external door jamb might be thicker or have grooves for weather seals and a more robust locking mechanism. The jambs for exterior doors often come with pre-cut recesses for weatherstripping and may be treated to resist moisture, too. In contrast, an internal door jamb doesn’t need a drip cap or a rubber seal, it just needs to support the door.

Despite these differences, interior and exterior door jambs share the same fundamental purpose. Both interior door jambs and exterior jambs must be installed plumb and secure so the door hangs correctly. And both interior and exterior door frames rely on the jambs plus head (and sill, if exterior) to form the structure around the door.

For those renovating or building, it’s useful to know that interior door frames/linings come in standard sizes (depths to match wall thickness), and exterior door frames often are sold as complete sets with sills. Make sure to get the right type - an internal door lining kit for indoor use, versus an exterior door frame set for an entry door. Using the wrong kind (for example, an interior jamb for an exterior door) could cause problems like rot or not fitting a threshold properly.

Articles & Information

The UK's leading supplier of high-quality timber doors

Patio Doors

Internal Bifold Doors

Single Internal Bifold Doors

	Roomfold Standard	Roomfold Deluxe	Roomfold Grande
Size Width Options	1215mm - 3502mm	1218mm - 4652mm	836mm - 3891mm
Available Finishes	Unfinished Oak, Prefinished Oak, & White Primed	Unfinished Oak, Prefinished Oak,& White Primed	Unfinished Oak, Prefinished Oak, White Primed, Black
Door Options	3,4, and 5 door options.	3,4,5 & 6 door options	2,3,4 and 5 door options
Trimming Ability - Height	20mm on height (contact us for details, as some sets can be trimmed more than this)	20mm on height (contact us for details, as some sets can be trimmed more than this)	20mm on height (contact us for details, as some sets can be trimmed more than this)
Trimming Ability - Width	20mm on 2 doors and then an extra 10mm per door thereafter. Where individual door leaf sizes are 686mm or bigger the trim allowance is 20mm per leaf - equal amounts off each side of the door.	20mm on 2 doors and then an extra 10mm per door thereafter. Where individual door leaf sizes are 686mm or bigger the trim allowance is 20mm per leaf - equal amounts off each side of the door.	20mm on 2 doors and then an extra 10mm per door thereafter. Where individual door leaf sizes are 686mm or bigger the trim allowance is 20mm per leaf - equal amounts off each side of the door.
Frame Depth	78mm	78mm	133mm
Frame Height	2078mm	2078mm	2060mm
Hardware	Top Hung only, with floor mounted pivot.	Top Hung, bottom guided, with 20mm high low level guide rail. Ideal for running different floorings up to each side.	Top Hung, with jamb mounted bottom pivot. Ideal for fitting on top of existing floorings, where the flooring finish is the same both sides of the door set. Or ideal on top of tiled floors.
Hardware Adjustment	Height - 6mm	Height - 6mm	Height - 10mm
Supplied with Drop Bolts	No	Yes	Yes
Delivery / Collection	Delivery £60, Collection free from either DE24 9HL, or S44 5HS, after order. All orders over £750 are free delivery.	Delivery £60, Collection free from either DE24 9HL, or S44 5HS, after order. All orders over £750 are free delivery.	Delivery £60, Collection free from either DE24 9HL, or S44 5HS, after order. All orders over £750 are free delivery.
Guarantee	10 years against manufacturing defects	10 years against manufacturing defects	10 years against manufacturing defects
Bespoke Service Available (24 week lead time)	No	No	Yes
Key Features and Benefits	Pairmaker not supplied on “meeting door” configurations. Frame always supplied in an unfinished Oak for on-site decorating no matter the door finish. Face fit hinges and hinge handle. Ideal for customers that will have the doors in their fully open or fully closed position 90% of the time and not using the mechanism on a regular basis. Perfect for closing off a room ona budget renovations/ offices. Will allow through flooring.	Frame supplied matching the door finish chosen. Can fill larger openings as the bottom track allows up to six door systems. Smooth operation at larger total widths with connection to the head and base track on the end of every other door. Face fit hinges and hinge handle. Ideal for customers changing flooring between rooms as the 20mm high 74mm deep low-level threshold gives a clean break between flooring. A robust, cost-effective system.	Frame supplied matching the door finish chosen. Superior “external grade” hardware allowing an incredibly smooth operation with no need for a base track. Face fit hinges and hinge handle including an offset hinge system which allows the doors to stack more compact than the other Roomfold options. Supplied with door stops across the whole internal rebate of the frame leaving no gaps at the top between top edge of the doors and underside of the track meaning they will offer more in terms of heat retention and sound reduction between rooms. More opening options that can suit any home. Our highest specification system with upgraded, stylish hardware.
Overall Rating

What Is the Difference Between a Door Jamb and a Door Frame?

What is a door jamb?

Why is it called a jamb?

Why is a door jamb important?

What is a door frame?

What parts make up a door frame?

Is a door jamb the same as a door casing or trim?

Door Jamb vs. Door Frame: What's the Difference?

Scope

Function

Interdependence

Can I replace a door jamb without replacing the entire door frame?

Installation

Terminology Confusion

Internal vs External Door Jambs and Frames

Can You Move a Door Frame?

Can You Make a Door Frame Smaller?

Replacing Your Door Frame

What Is the Difference Between a Door Jamb and a Door Frame?

What Is a Door Jamb's Size?

What Are the Parts of a Door Jamb?

How do You Fix a Door Jamb?

What Does Pre Hung Door Mean?

What Size is a Standard Door Frame?

Door Frame FAQs

What Is the Difference Between a Door Frame and Door Lining?

Everything You Need to Know About Door Frames

Painting your Door and Door Frame

How To Frame A Bifold Door

Patio Doors

Internal Bifold Doors

Internal French Doors

Door Sets

Internal Doors

Fire Doors

Shop By Brand

More Ranges

What Is the Difference Between a Door Jamb and a Door Frame?

What is a door jamb?

Why is it called a jamb?

Why is a door jamb important?

What is a door frame?

What parts make up a door frame?

Is a door jamb the same as a door casing or trim?

Door Jamb vs. Door Frame: What's the Difference?

Scope

Function

Interdependence

Can I replace a door jamb without replacing the entire door frame?

Installation

Terminology Confusion

Internal vs External Door Jambs and Frames

More Ranges

Roomfold Comparison